Pneumatics

Air Preparation / FRL

Air Preparation / FRL

Pneumatic Accessories

Pneumatic Accessories

Pneumatic Fittings

Pneumatic Fittings

Pneumatic Tubes

Pneumatic Tubes

Pneumatics Cylinders & Actuators

Pneumatics Cylinders & Actuators

9 subcategories · 578 products

Pneumatics Valves

Pneumatics Valves

Vacuum Components

Vacuum Components

AC series three-point combination

AC series three-point combination

Pneumatic Solenoid Valve 4V410 Series 10 3/8 Single Coil Double Positions 5/2 Way AC220V With Wire
Pneumatic Solenoid Valve 3V410 Series 10 3/8 Single Coil Double Positions 3/2 Way DC12V With Terminal
Guided Compact Cylinder 20×20 Mm – Non-Magnetic Piston | Bore: 20 Mm | Stroke: 20 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Guided Actuator; Confirm Allowable Side Loads And Moments. 20 Mm 20 Mm Double-Acting Without Cushioning Non-Magnetic Piston 0.1–1.0 Mpa (Verify Series)
FRL / Air Preparation Unit AL5000-06 Compressed-Air Lubricator / Oil Mist Unit Port Size: 3/4 In; Recommended Oil: Turbine Oil ISO VG32 Where Specified Ambient Temperature -5 To 60°C For AL10-A Family; Other Family Values Are Model-Dependent AL/BL Series Air Lubricator
FRL / Air Preparation Unit AC1000-M5 Filter + Regulator + Lubricator Port Size: M5×0.8; Compressed Air Max. Operating Pressure 1.0 Mpa; Ambient Temperature -5 To 60°C; Set Pressure Range 0.15–0.85 Mpa; Nominal Filtration 5 Μm Where Specified AC Series Three-Point Combination
FRL / Air Preparation Unit AF4000-04 Compressed-Air Filter Port Size: 1/2 In; Filtration Rating: 5 Μm Or 40 Μm Depending On Series/Version Maximum Operating Pressure 1.0 Mpa And Temperature -5 To 60°C For AF/AF-A Series; Other Series Values Vary AF Series Air Filter
Pneumatic Solenoid Valve 4V420 Series 10 3/8 Double Coils Double Positions 5/2 Way AC110 With Wire
ISO 15552 Double-Acting Cylinder 40×50 Mm – Without Cushioning – Non-Magnetic Piston | Bore: 40 Mm | Stroke: 50 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Industrial Linear Actuator; Verify Dimensions, Force, Cushioning And Sensor Compatibility. 40 Mm 50 Mm Double-Acting Without Cushioning Non-Magnetic Piston 0.1–1.0 Mpa (Verify Series)
Compact Double-Acting Cylinder 32×10 Mm – Non-Magnetic Piston | Bore: 32 Mm | Stroke: 10 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Space-Saving Actuator; Confirm Dimensions And Mounting Pattern. 32 Mm 10 Mm Double-Acting Without Cushioning Non-Magnetic Piston 0.1–1.0 Mpa (Verify Series)
Seal Kit – ISO Cylinder Bore 80 Mm – FKM | Bore: 80 Mm | Body/Seal: FKM; Compatibility To Verify | Temperature: Compound And Series Dependent | Confirm Exact Cylinder Series And Dimensions; Bore Alone Is Insufficient. 80 Mm 10 Mm Per Jaw Typically Double-Acting; Verify Series Without Cushioning Without Sensor Option Compatible Cylinder Series Only
Pneumatic Solenoid Valve 4V220 Series 06 1/8 Double Coils Double Positions 5/2 Way AC220V With Wire
FRL / Air Preparation Unit GL400-03 Compressed-Air Lubricator / Oil Mist Unit Port Size: 3/8 In; Recommended Oil: Turbine Oil ISO VG32 Where Specified Ambient Temperature -5 To 60°C For AL10-A Family; Other Family Values Are Model-Dependent G Series Air Lubricator
Brass Female-Thread Connector SP-PCF8-04 Brass Female Straight Connector Tube Size: 8 Mm; Second Size: 04 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue SP-PCF
Straight Push-In Connector PC12-04 Straight Male Connector Tube Size: 12 Mm; Second Size: 04 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue PC
Pneumatic Solenoid Valve 2V025 Series 08 1/4 Single Coil Double Positions 2/2 Way AC110 With Wire
Pneumatic Tube PE1410-200M-GN Polyethylene Tube Outside Diameter: 14 Mm; Inside Diameter: 10 Mm; Length: 200 M Colour: Green; Order-Code Format Verified Against Catalogue Tube Ordering Diagram PE Tube
Vacuum Component ZP2-03UN Pneumatic Vacuum Component Manufacturer Model: ZP2-03UN Vacuum Cup/Generator Component Family Per Catalogue; Dimensions And Vacuum Performance Not Stated For Every Item Vacuum Parts
Compact Double-Acting Cylinder 20×10 Mm – Magnetic Piston | Bore: 20 Mm | Stroke: 10 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Space-Saving Actuator; Confirm Dimensions And Mounting Pattern. 20 Mm 10 Mm Double-Acting Without Cushioning Magnetic Piston 0.1–1.0 Mpa (Verify Series)
Pneumatic Solenoid Valve 4V120 Series M5 M5 Double Coils Double Positions 5/2 Way AC220V With Wire
Pneumaticair Control Valve 4A230 Series Air 5/3 06 1/8
Pneumatic Solenoid Valve 4V310 Series 10 3/8 Single Coil Double Positions 5/2 Way DC12V With Wire
Vacuum Component ZP2-TB10 Pneumatic Vacuum Component Manufacturer Model: ZP2-TB10 Vacuum Cup/Generator Component Family Per Catalogue; Dimensions And Vacuum Performance Not Stated For Every Item Vacuum Parts
Magnetic Switch CSJUT Cylinder Magnetic Switch / Sensor Model: CSJUT For Pneumatic Cylinder Position Sensing; Electrical Output/Details Depend On Exact Switch Model Magnetic Switch
Pneumatic Tube PA1410-200M-YE Nylon Tube Outside Diameter: 14 Mm; Inside Diameter: 10 Mm; Length: 200 M Colour: Yellow; Order-Code Format Verified Against Catalogue Tube Ordering Diagram PA Tube
Brass Elbow Connector SP-PV10-03 Brass Elbow Connector Tube Size: 10 Mm; Second Size: 03 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue SP-PV
FRL / Air Preparation Unit AD-M5 Automatic Water Trap Port Size: M5×0.8; Automatic Condensate Draining Catalogue Operating Range 0.15–0.85 Mpa; Ambient Temperature 5–60°C (Catalogue Transcription) AD/AH Automatic Water Trap
2-Jaw Parallel Gripper Size 10 – 10 Mm Per Jaw – Without Sensor Option | Bore: Size-Based Mm | Stroke: 10 Mm Per Jaw Mm | Body/Seal: Aluminium Alloy; Replaceable Fingers (Proposed) | Temperature: Series-Dependent | Verify Gripping Force, Repeatability And Jaw Travel With Manufacturer. Size 10 10 Mm Per Jaw Typically Double-Acting; Verify Series Without Cushioning Without Sensor Option Typically 2–7 Bar; Verify Series (Verify Supplier Data)
Pneumatic Solenoid Valve 4M210 Series 06 1/8 Single Coil Double Positions 5/2 Way DC12V With Terminal
Rodless Cylinder 20×500 Mm – Mechanical Coupling – With Sensor Option | Bore: 20 Mm | Stroke: 500 Mm | Body/Seal: Aluminium Alloy / Series-Dependent Seals | Temperature: Series-Dependent | Long-Stroke Actuator; Verify Load, Speed, Bending Moment And Coupling Limits. 20 Mm 500 Mm Double-Acting Without Cushioning With Sensor Option Typically 1–8 Bar; Verify Series (Verify Supplier Data)
Pneumatic Tube PE1612-100M-GN Polyethylene Tube Outside Diameter: 16 Mm; Inside Diameter: 12 Mm; Length: 100 M Colour: Green; Order-Code Format Verified Against Catalogue Tube Ordering Diagram PE Tube
Straight Push-In Connector PC16-03 Straight Male Connector Tube Size: 16 Mm; Second Size: 03 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue PC
Pneumatic Solenoid Valve 4M320 Series 08 1/4 Double Coils Double Positions 5/2 Way AC110 With Terminal
Elbow Push-In Connector PL10-01 Elbow Male Connector Tube Size: 10 Mm; Second Size: 01 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue PL
C-Type Quick Joint Non-Self-Locking / Self-Locking PM-30 C-Type Joint Fitting Size/Connection Per Model Code Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue C-Type Joint
Mini Cylinder 8×20 Mm – Double-Acting – Magnetic Piston | Bore: 8 Mm | Stroke: 20 Mm | Body/Seal: Aluminium Or Stainless Steel / Seal Series-Dependent | Temperature: Typically −5 To 70 °C; Verify Series | Compact Light-Duty Actuator; Verify Spring Force And Stroke Where Applicable. 8 Mm 20 Mm Double-Acting Without Cushioning Magnetic Piston 0.1–1.0 Mpa (Verify Series)
FRL / Air Preparation Unit AW20-B-02 Air Filter-Regulator / Air Preparation Port Size: 1/4 In; Medium: Compressed Air Operating Pressure Range: 0.15–0.85 Mpa (Series-Dependent); Temperature Range Typically -5 To 60°C Where Specified; Filter Rating 5 Μm Or 40 Μm Depending On Version AW-B Series Air Filter-Regulator
FRL / Air Preparation Unit AL4000-04 Compressed-Air Lubricator / Oil Mist Unit Port Size: 1/2 In; Recommended Oil: Turbine Oil ISO VG32 Where Specified Ambient Temperature -5 To 60°C For AL10-A Family; Other Family Values Are Model-Dependent AL/BL Series Air Lubricator
Pneumatic Solenoid Valve 4V420 Series 15 1/2 Double Coils Double Positions 5/2 Way DC12V With Terminal
Pneumatic Solenoid Valve 4V410 Series 15 1/2 Single Coil Double Positions 5/2 Way DC12V With Wire
FRL / Air Preparation Unit AC2010-01 Filter + Regulator (Two-Point Combination) Port Size: 1/8 In; Compressed Air Max. Operating Pressure 1.0 Mpa; Ambient Temperature -5 To 60°C; Set Pressure Range 0.15–0.85 Mpa; Nominal Filtration 5 Μm Where Specified AC Series Two-Point Combination
ISO 15552 Double-Acting Cylinder 32×400 Mm – Adjustable Cushioning – Non-Magnetic Piston | Bore: 32 Mm | Stroke: 400 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Industrial Linear Actuator; Verify Dimensions, Force, Cushioning And Sensor Compatibility. 32 Mm 400 Mm Double-Acting Adjustable Cushioning Non-Magnetic Piston 0.1–1.0 Mpa (Verify Series)
PU Series Solenoid Valve PU220-20 10 3/8 Double Coils Double Positions 5/3Way DC12V With Wire
Elbow Push-In Connector PL10-04 Elbow Male Connector Tube Size: 10 Mm; Second Size: 04 Mm Connector Configuration Identified From Catalogue Family/Model Listing; Pressure Rating And Material Not Specified For Every Model In The Catalogue PL
Pneumatic Solenoid Valve 4M330 Series 10 3/8 Double Coils Double Positions 5/3Way AC220V With Wire
Pneumatic Tube PU0806-200M-GN Polyurethane Tube Outside Diameter: 8 Mm; Inside Diameter: 6 Mm; Length: 200 M Colour: Green; Order-Code Format Verified Against Catalogue Tube Ordering Diagram PU Tube
Pneumatic Tube PE10065-100M-GN PE Tube Tube Type Per Series Size/Length/Colour Must Be Confirmed From Complete Model Code PE Tube
Compact Double-Acting Cylinder 16×5 Mm – Non-Magnetic Piston | Bore: 16 Mm | Stroke: 5 Mm | Body/Seal: Aluminium Alloy / NBR (Proposed) | Temperature: Typically −5 To 70 °C; Verify Series | Space-Saving Actuator; Confirm Dimensions And Mounting Pattern. 16 Mm 5 Mm Double-Acting Without Cushioning Non-Magnetic Piston 0.1–1.0 Mpa (Verify Series)
Pneumatic Tube PU0604-200M-WH Polyurethane Tube Outside Diameter: 6 Mm; Inside Diameter: 4 Mm; Length: 200 M Colour: White; Order-Code Format Verified Against Catalogue Tube Ordering Diagram PU Tube

This website uses cookies

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services.

Cookies are small text files that can be used by websites to make a user's experience more efficient.

The law states that we can store cookies on your device if they are strictly necessary for the operation of this site. For all other types of cookies we need your permission. This means that cookies which are categorized as necessary, are processed based on GDPR Art. 6 (1) (f). All other cookies, meaning those from the categories preferences and marketing, are processed based on GDPR Art. 6 (1) (a) GDPR.

This site uses different types of cookies. Some cookies are placed by third party services that appear on our pages.

You can at any time change or withdraw your consent from the Cookie Declaration on our website.

Learn more about who we are, how you can contact us and how we process personal data in our Privacy Policy.

Please state your consent ID and date when you contact us regarding your consent.